Bva-hydraulics H0500--H3008 Manuel d'utilisateur télécharger pdf (Page 2)

WARNING: NEVER use hydraulic cylinder as a support

device.

WARNING: Always check connections before using.

Alteration of these products is strictly prohibited. Use

only those adapters and attachments provided and

approved by the manufacturer.

WARNING: To reduce the risk of personal injury and/

or property damage, ensure that the rated working

pressure of each pressurized attachment be equal to or

greater than the rated working pressure developed by

the hydraulic pump.

BEFORE USE

1. Before using this product, read the owner's manual

completely and familiarize yourself thoroughly with the

product, its components and recognize the hazards

associated with its use.

2. Verify that the product and the application are compatible.

If in doubt, call BVA Hydraulics Technical Service (888)

332-6419.

3. Inspect before each use. Do not use if bent, broken, leaking

or damaged components are noted.

Replace worn or damaged parts and assemblies with BVA

Hydraulics authorized replacement parts only. Lubricate as

instructed in Maintenance Section.

5. Ensure method of conrming load is accurate and working

properly. Have gauge or load cell accuracy veried by

qualied personnel on a yearly basis.

SAFETY AND GENERAL INFORMATION

Save these instructions. For your safety, read and understand

the information contained within. The owner and operator shall

have an understanding of this product and safe operating

procedures before attempting to use this product. Instructions

and safety information shall be conveyed in the operator’s

native language before use of this product is authorized. Make

certain that the operator thoroughly understands the inherent

dangers associated with the use and misuse of the product. If

any doubt exists as to the safe and proper use of this product

as outlined in this factory authorized manual, remove from

service immediately.

Inspect before each use. Do not use if leaking, broken, bent,

cracked or otherwise damaged parts are noted. If the cylinder

has been or suspected to have been subjected to a shock load

(a load dropped suddenly, unexpectedly upon it), discontinue

use until checked out by a BVA Hydraulics authorized service

center. Owners and operators of this equipment shall be aware

that the use and subsequent repair of this equipment may

require special training and knowledge. It is recommended that

an annual inspection be done by qualied personnel and that

any missing or damaged parts, decals, warning/safety labels or

signs be replaced with BVA Hydraulics authorized replacement

parts only. Any cylinder that appears to be damaged in any way,

is worn or operates abnormally shall be removed from service

immediately until such time as repairs can be made.

PRODUCT DESCRIPTION

BVA Hydraulics Single Acting Cylinder is designed for rated

capacity pushing, spreading and pressing jobs. A wide variety

of applications exist for this category of product. Special skill,

knowledge and training may be required for a specic task

and the product may not be suitable for all the jobs described

above. Unsuitable applications would include applications that

call for a device to move, level or support persons, animals,

hazardous materials, mobile homes/dwellings in general,

mirrors and/or plate glass, and/or to connect/secure hatches,

components, etc. between bulkheads. The user ultimately

must make the decision regarding suitability of the product

for any given task and therefore accept responsibility for that

decision. Immediately after lifting, loads must be supported

by appropriate mechanical means.

Figure 1 - Model H0500 Components Figure 2 - Typical Cylinder Components

Saddle

Ram

Collar

Protective Cap

Cylinder

Female Coupler

Dust Cover

Rubber Plug

Dust Cover

Rubber Plug

Female Coupler

3/8” NPTF

Base

1 2 3 4 5 6 7 ... 19 20

Commentaires sur ces manuels

Pas de commentaire

Bva-hydraulics H0500--H3008 Manuel d'utilisateur Page 2

Commentaires sur ces manuels

Produits connexes et manuels pour Équipement Bva-hydraulics H0500--H3008